Hazardous Location Lights & Strobes

These products are suitable for use in Class I Division 2 Hazardous Locations.

Model FB-5119H Hazardous Location Strobes

A series of hazardous location strobe lights that provides 80 high intensity flashes per minute.

This warning light utilizes 24VDC and features a voltage in-rush limiting PCB design that provides greater compatibility with factory automation control systems and less electrical interference with in-rush sensitive devices.

UL Listed for Class I, Division 2, Groups A,B, C and D; Class II, Division 1,Groups E, F and G; and Class III.

The FB-5119H meets Type 4X water-tight, dust-tight, and corrosion resistant requirements; constructed to IP66. It has an aluminum base, coated for corrosion resistance that is ready for mounting on a 3/4-inch pipe and includes a metal dome guard that fits over the glass dome to protect it.

The FB-5119H has an effective candela (ECP) of 165 and a 520,000 peak candela. It is available in six dome colors, including amber, blue, clear, green and red (magenta upon request).

This FireBus strobe light is specifically designed for hazardous locations or corrosive environments where a very bright visual signal is required.

These warning lights can be used alone or combined into “light trees” using the different available colors to annunciate a variety of hazard warnings in facilities both on and offshore.

Model FB-5126H Hazardous Location Lamp

This green, steady burn, hazardous location signal light features a super bright LED array for greater efficiency, lower maintenance and a longer life. 

The unit has been certified by UL as meeting Type 4X watertight and corrosion resistant requirements, and is IP66 rated.  This hazardous location warning light has an aluminum base ready for mounting on 3/4 inch pipe. The base features electrostatically applied (e-coated) epoxy paint for corrosion-resistance.  A dome guard fits over the glass dome to protect it against accidental collision with moving equipment.  The outer glass dome and LED array are carefully matched to ensure a pure, bright green color with an intense light output that can approach 60,000 hours of service without LED replacement.  

Increased shock and vibration resistance add to this unit’s rugged industrial portfolio of features. The FB-5126H is UL Listed for Class I, Division 2, Groups A, B, C and D; Class II Division 1, Groups E, F and G; and Class III.

Model FB-5148H Hazardous Location Strobes

A series of hazardous location strobe lights that provides 80 high intensity flashes per minute. Thiswarning light utilizes 24VDC and features a voltage in-rush limiting PCB design that provides greater compatibility with factory automation control systems and less electrical interference with in-rush sensitive devices.

The Model 5148H has been certified by UL as meeting Type 4X water tight and corrosion resistant requirements; constructed to IP66 (in dome up orientation). This hazardous location warning light has a black polyurethane coated base and the inner fresnel lens is available in six colors (including magenta).

The clear polycarbonate outer dome can be quickly removed for easy access to inspect the unit or change the lamp.

The 5148H has an effective candela of 240 and a 580,000 peak candela.

The 5148H is UL Listed and CSA Certified for Class I, Division 2, Groups A, B, C and D;

Class II, Division 2, Groups F and G; and Class III.

Model 5148H is ideal for wet, corrosive atmospheres like those found in heavy industry, or anywhere a visual signal is needed.

This Strobe Warning Light is specifically designed for use in hazardous locations or where corrosive materials are present.

Model FB-5127H Hazardous Location Lights

The FireBus™ 5127H is a hazardous location flashing signal light that features a super bright LED array for longer life and lower power consumption. The unit utilizes 24VDC for power and is available in five colors – amber, blue, green, red and clear.

The 5127H comes standard in flashing mode and is field configurable to steady burn mode for maximum functionality.

The Model 5127H has been certified by UL as meeting Type 4X watertight and corrosion-resistant requirements, and is rated for Division 2 applications. This hazardous location warning light has a black polyurethane-coated base and the inner Fresnel lens is available in five colors – amber, blue, green, red and clear.

The clear polycarbonate outer dome can be quickly removed for access while changing the LED or inspecting the unit. The super bright LED array used in the 5147H produces intense light output and 60,000 hours of service.

Increased shock and vibration resistance add to this unit’s rugged industrial portfolio of features.

The 5147H is UL Listed for Class I, Division 2, Groups A, B, C and D; Class II Division 2, Groups F and G; and Class III.

The FireBus Model 5147H is ideal for wet, corrosive

atmospheres like those found in many industrial environments or anywhere a vibration-resistant visual signal is needed.